Toad's Factory - Revision history

Tactical: Added Task 21 2025 to the list of tasks TF was part of

2025-10-28T13:29:10Z

Added Task 21 2025 to the list of tasks TF was part of

← Older revision		Revision as of 15:29, 28 October 2025
Line 43:		Line 43:
	=== TAS Competitions ===		=== TAS Competitions ===

	Toad's Factory has featured in one of [[FlaminFunky's Challenges]] (#4) and ~~three~~ tasks of the [[MKWii TAS Competition]] (Task 14 2020, Task 1 2021, Task 16 2023). Task 14 2020 is infamous for CampbellMop's disqualification by touching one of the green conveyor belts for a single frame.<ref>[https://www.youtube.com/watch?v=fipnI_Tnjmw "When You Touch the Conveyor for One Frame" by Campbell Mop]</ref>		Toad's Factory has featured in one of [[FlaminFunky's Challenges]] (#4) and four tasks of the [[MKWii TAS Competition]] (Task 14 2020, Task 1 2021, Task 16 2023, Task 21 2025). Task 14 2020 is infamous for CampbellMop's disqualification by touching one of the green conveyor belts for a single frame.<ref>[https://www.youtube.com/watch?v=fipnI_Tnjmw "When You Touch the Conveyor for One Frame" by Campbell Mop]</ref>

	== Future ==		== Future ==

Kierio04: /* TAS Competitions */ Added Task 16 2023

2023-12-19T04:39:24Z

TAS Competitions: Added Task 16 2023

← Older revision		Revision as of 06:39, 19 December 2023
Line 43:		Line 43:
	=== TAS Competitions ===		=== TAS Competitions ===

	Toad's Factory has featured in one of [[FlaminFunky's Challenges]] (#4) and ~~two~~ tasks of the [[MKWii TAS Competition]] (Task 14 2020, Task 1 2021). Task 14 2020 is infamous for CampbellMop's disqualification by touching one of the green conveyor belts for a single frame.<ref>[https://www.youtube.com/watch?v=fipnI_Tnjmw "When You Touch the Conveyor for One Frame" by Campbell Mop]</ref>		Toad's Factory has featured in one of [[FlaminFunky's Challenges]] (#4) and three tasks of the [[MKWii TAS Competition]] (Task 14 2020, Task 1 2021, Task 16 2023). Task 14 2020 is infamous for CampbellMop's disqualification by touching one of the green conveyor belts for a single frame.<ref>[https://www.youtube.com/watch?v=fipnI_Tnjmw "When You Touch the Conveyor for One Frame" by Campbell Mop]</ref>

	== Future ==		== Future ==

Kierio04: /* Overview */ Added note about UR 3lap/flap being NU 3lap/flap

2023-12-19T00:49:46Z

Overview: Added note about UR 3lap/flap being NU 3lap/flap

← Older revision		Revision as of 02:49, 19 December 2023
Line 19:		Line 19:
	\|}		\|}

	Toad's Factory has a [[wallclip]] shortcut, and currently benefits from the use of [[supergrinding]] and [[superhopping]] in both 3lap and flap categories. Hence, it has two 3lap and two flap categories.		Toad's Factory has a [[wallclip]] shortcut, and currently benefits from the use of [[supergrinding]] and [[superhopping]] in both 3lap and flap categories. Hence, it has two 3lap and two flap categories. The Unrestricted 3lap and Unrestricted Flap records are technically the No Ultra 3lap and No Ultra flap records respectively since no ultra shortcuts are used in either TAS.

	=== Unrestricted 3lap ===		=== Unrestricted 3lap ===

Kierio04: /* Overview */ Corrected mistake in summary table

2023-11-22T01:18:59Z

Overview: Corrected mistake in summary table

← Older revision		Revision as of 03:18, 22 November 2023
Line 12:		Line 12:
	!3lap		!3lap
	\| colspan="2" style="text-align:center;" \|1:35.950		\| colspan="2" style="text-align:center;" \|1:35.950
	\| style="text-align:center;" \|1:36.~~262~~		\| style="text-align:center;" \|1:45.696
	\|-		\|-
	!Flap		!Flap

Kierio04: /* No Glitch 3lap */ Conceded to use 1:45.696 BKT

2023-11-21T22:09:57Z

No Glitch 3lap: Conceded to use 1:45.696 BKT

← Older revision		Revision as of 00:09, 22 November 2023
Line 30:		Line 30:

	=== No Glitch 3lap ===		=== No Glitch 3lap ===
	:''Video: [https://www.youtube.com/watch?v=51pvNH8oTyM 1:45.~~699~~ by ~~mans~~ and ~~Abby~~ (~~2021~~)]''		:''Video: [https://www.youtube.com/watch?v=51pvNH8oTyM 1:45.696 by ego and sorry (2022)]''
	The current strategy for NG 3lap is to drive 3 laps normally. The TAS starts off exactly the same as the UR 3lap, but branches off from the second turn, where it uses a mushroom each lap. In the section where the box clip would happen, a [[Wheelie#Rewheelie \| rewheelie]] is performed when landing from the trick, allowing for a delayed [[Wheelie#chain \| wheelie chain]].		The current strategy for NG 3lap is to drive 3 laps normally. The TAS starts off exactly the same as the UR 3lap, but branches off from the second turn, where it uses a mushroom each lap. In the section where the box clip would happen, a [[Wheelie#Rewheelie \| rewheelie]] is performed when landing from the trick, allowing for a delayed [[Wheelie#chain \| wheelie chain]].

Kierio04: /* Unrestricted 3lap */ Conceded to use 1:35.950 BKT

2023-11-21T21:56:19Z

Unrestricted 3lap: Conceded to use 1:35.950 BKT

← Older revision		Revision as of 23:56, 21 November 2023
Line 22:		Line 22:

	=== Unrestricted 3lap ===		=== Unrestricted 3lap ===
	:''Video: [https://~~youtu~~.be/~~8TW65PHSk8E~~?t=12 1:35.~~955~~ by RS, Ejay, Jellopuff, Luke, Malleo, Marth, Rocky, and ~~SwareJonge~~ (~~2019~~)]''		:''Video: [https://www.youtube.com/watch?v=Nky3q2XdCJs 1:35.950 by RS, Ejay, Jellopuff, Luke, Malleo, Marth, Rocky, SwareJonge, ego, Kierio, and sorry (2022)]''
	The current strategy for UR 3lap is to perform the "box clip" shortcut. On lap 1, to maximise your [[moving road velocity]] (MRV) while avoiding being squished by the stompers, you wallclip them and reo drift to correct your alignment. When reaching the end of any conveyor, momentum hops are used to preserve MRV longer - this is done twice each lap. By performing a wallclip off a moving box as it falls off the track on the right side, you can reach the conveyor turn with a single mushroom, saving several seconds. The caveat to this is that the boxes are on a cycle, so there is a fixed time at which you can perform the shortcut on each lap, resulting in a [[pacelock]]. Upon landing from the "box clip" shortcut, [[Rapid-fire hop abuse \| RFH]] is performed to retain low [[Rotational axes#Pitch \| pitch]], thereby reducing your forward speed and letting you turn faster. When exiting the factory, a [[wall trick]] is used to land much sooner, but late enough that the trick boost extends into the "lake cut". By launching off the first bump in the right way, and using [[TF physics]], you can clear the entire lake, landing on the bulldozer on the other side. Here, you can use the reject road at the top of the bulldozer to gain large amounts of XZ speed, once again using RFH to turn tighter. Laps 2 and 3 are the same as lap 1, except for two things. First, the initial conveyor strategies are unnecessary, as the stomper cycle is different. Second, the first boost panel after the lake cut is covered by the bulldozer. By losing time in a creative way, you can approach the bulldozer slightly sooner than when it is properly uncovered. You do an RFH low trick off the first bump, then get two tricks in quick succession to angle yourself towards the bulldozer. Then, you wheelie off the edge of the bulldozer, landing above where the boost panel would be. Provided you have enough negative Y velocity, you can partially clip into the bulldozer's road triangle, touching the boost panel. This is marginally faster than performing a proper lake cut and going to the first left boost panel.		The current strategy for UR 3lap is to perform the "box clip" shortcut. On lap 1, to maximise your [[moving road velocity]] (MRV) while avoiding being squished by the stompers, you wallclip them and reo drift to correct your alignment. When reaching the end of any conveyor, momentum hops are used to preserve MRV longer - this is done twice each lap. By performing a wallclip off a moving box as it falls off the track on the right side, you can reach the conveyor turn with a single mushroom, saving several seconds. The caveat to this is that the boxes are on a cycle, so there is a fixed time at which you can perform the shortcut on each lap, resulting in a [[pacelock]]. Upon landing from the "box clip" shortcut, [[Rapid-fire hop abuse \| RFH]] is performed to retain low [[Rotational axes#Pitch \| pitch]], thereby reducing your forward speed and letting you turn faster. When exiting the factory, a [[wall trick]] is used to land much sooner, but late enough that the trick boost extends into the "lake cut". By launching off the first bump in the right way, and using [[TF physics]], you can clear the entire lake, landing on the bulldozer on the other side. Here, you can use the reject road at the top of the bulldozer to gain large amounts of XZ speed, once again using RFH to turn tighter. Laps 2 and 3 are the same as lap 1, except for two things. First, the initial conveyor strategies are unnecessary, as the stomper cycle is different. Second, the first boost panel after the lake cut is covered by the bulldozer. By losing time in a creative way, you can approach the bulldozer slightly sooner than when it is properly uncovered. You do an RFH low trick off the first bump, then get two tricks in quick succession to angle yourself towards the bulldozer. Then, you wheelie off the edge of the bulldozer, landing above where the boost panel would be. Provided you have enough negative Y velocity, you can partially clip into the bulldozer's road triangle, touching the boost panel. This is marginally faster than performing a proper lake cut and going to the first left boost panel.

Kierio04: /* Future */ Added references

2023-08-30T03:01:51Z

Future: Added references

← Older revision		Revision as of 05:01, 30 August 2023
Line 53:		Line 53:

	'''UR flap'''		'''UR flap'''
	* Using [[Vehicles#Dolphin Dasher \| Dolphin Dasher]], [[supersliding]] (requires a long setup) into the lap and around the first two turns is about 0.5 faster than supergrinding into the lap with [[Vehicles#Flame Runner \| Flame Runner]], which itself is faster than the trick boost entry.		* Using [[Vehicles#Dolphin Dasher \| Dolphin Dasher]], [[supersliding]] (requires a long setup) into the lap and around the first two turns is about 0.5 faster than supergrinding into the lap with [[Vehicles#Flame Runner \| Flame Runner]], which itself is faster than the trick boost entry.<ref>[https://cdn.discordapp.com/attachments/735589843513638940/1143248364595585034/RMCJ01-200.png Screenshot of early Dolphin Dasher superslide lap time by Monster]</ref><ref>[https://www.youtube.com/watch?v=3N3hYIOeJYo "<nowiki>[MKWii TAS]</nowiki> New Supergrind Strat on Toad's Factory" by Ejay B]</ref>

	'''NG 3lap'''		'''NG 3lap'''

Kierio04: /* Known timesaves */ Added some UR flap info

2023-08-30T02:44:38Z

Known timesaves: Added some UR flap info

← Older revision		Revision as of 04:44, 30 August 2023
Line 53:		Line 53:

	'''UR flap'''		'''UR flap'''
	* Using [[Vehicles#Dolphin Dasher \| Dolphin Dasher]], [[supersliding]] ~~into the lap~~ (requires a long setup), and around the first two turns is about 0.5 faster than supergrinding into the lap with [[Vehicles#Flame Runner \| Flame Runner]].		* Using [[Vehicles#Dolphin Dasher \| Dolphin Dasher]], [[supersliding]] (requires a long setup) into the lap and around the first two turns is about 0.5 faster than supergrinding into the lap with [[Vehicles#Flame Runner \| Flame Runner]], which itself is faster than the trick boost entry.

	'''NG 3lap'''		'''NG 3lap'''

Kierio04: /* Possible timesaves */ Renamed title of section to be consistent with other track pages

2023-08-27T04:25:41Z

Possible timesaves: Renamed title of section to be consistent with other track pages

← Older revision		Revision as of 06:25, 27 August 2023
Line 61:		Line 61:
	* The entire TAS is several years old, and thus does not use wheel inputs for a full input range in airtime, which would save a lot on the lake cut.		* The entire TAS is several years old, and thus does not use wheel inputs for a full input range in airtime, which would save a lot on the lake cut.

	=== ~~Possible~~ timesaves ===		=== Potential timesaves ===

	'''UR 3lap'''		'''UR 3lap'''

Ejay B at 03:05, 27 August 2023

2023-08-27T03:05:24Z

← Older revision		Revision as of 05:05, 27 August 2023
Line 56:		Line 56:

	'''NG 3lap'''		'''NG 3lap'''
	* The beginning and first two turns have been shown to be improvable by a frame.		* The beginning and first two turns have been shown to be improvable by a frame.<ref>[https://cdn.discordapp.com/attachments/735589843513638940/1115441305338789918/Screen_Shot_2023-06-05_at_5.45.02_PM.png Screenshot of small improvement by Justin]</ref>

	'''NG flap'''		'''NG flap'''